中文
English
Español
Français{{i.title_en}}
RVE Worm-Gear Speeder
MOQ: 10 PCS
Note: If you have any questions,please contact us
- 1. It has a variety of installation methods, output forms and input interfaces provide a highly flexible drive system with small volume, good heat exchange performance,fast heat dissipation,
- 2.Smooth operation,low vibration,low noise, high transmission efficiency and large output torque. It is suitable for omnidirectional installation
- 3. As standard options,output forms and input interfaces provide a highly flexible drive system with small volume, good heat exchange performance,fast heat dissipation,
- 4. Smooth operation,low vibration,low noise, high transmission efficiency and large output torque.lt is suitable for omnidirectional installation
- 5.Which is die castled from aluminum alloy,the housing has good appearance,compact structure and large transmission ratio,and has self-locking function under certain conditions.
- RVE Worm-Gear Speeder
Zhejiang Supror Machinery Technology Co.,Ltd
Since:
2003
Product Description
RVE Mounting positions
RVE Dimensions
RV Reducer Lubrication Volume
Lubrication volume for RV is related with mounting position of reducer.
AII stock of RV reducers are filled with WA460 Lubrication according to B3 mounting position. For 110 and 130 reducers,if the mounting position is different from B3,a special indication is required.
Lubrication Volume(Liter)
| RV | 025 | 030 | 040 | 050 | 063 | 75 | 90 | 110 | 130 | 150 |
| B3 |
0.02 |
0.042 |
0.081 |
0.0153 |
0.3 |
0.58 |
1.02 | 3.02 | 4.55 | 7 |
| B8 | 2.25 | 3.35 | 5.1 | |||||||
| B6、B7 | 2.55 | 3.55 | 5.4 | |||||||
| V5、V6 | 3.02 | 4.55 | 7 |
Install precautions
--The mounting on the machine must be stable to avoid any vibration.
--Check the correct direction of rotation of the reduction unit output shaft before fitting the unit to the machine.
--In the case of particularly lengthy of periods of storage(4-6months)if the oil seal is not immersed in the lubricant inside recommended to change it since the rubber could stick to the shaft or even has lost the elasticity it needs to function probe.
--For a shaft mounting,for reduction units with a hollow output shafts,use the torque arms motionclinic can supply. If it is n make sure that the constraint is axially free and with such as play as to ensure free movement to the reduction unit.
--Whenever possible,protect the reduction unit against solar radiation and bad weather.
--Ensure the motor cools correctly by assuring good passage of air from the fan side.
--In the case of ambient temperatures
--The various parts(pulleys,gearwheels,couplings,shafts,etc.)must be mounted on the solid or hollow shafts using special holes or other systems that anyhow ensure correct operation without risking damage to the bearings or external parts of the uni
--Painting must definitely not go over rubber parts and the holes on the breather plugs,if there are any.
--Taking out the seal embolism of the oil hole.
--Check the height of the oil level.
--Supposing the gear unit have not coupled with the motor,please pay attention to the following items to make sure rightly connection.Mounting to B5,B14
--Check whether the tolerance between the shaft and motor flange fit for the essential standard.
--Washing the dirt and the paint on the surfaces of the shaft,center bore and the flange.
--Mounting avoid the gear unit incur strength.
--Check the position and the decimation of the motor key slot.
--Lubricate the surfaces in contact to avoid seizure or oxidation.
--Starting must take place gradually,without immediately applying the maximum load.
--When there are parts objects or materials under the motor drive that can be damaged by even limited spillage of oil,special should be fitted.