中文
English
Español
Français{{i.title_en}}
Home
> Hydraulics> Hydraulic Motor> Hydraulic Orbital Motors > Hydraulic Motor BMER OMER 350 375 400 CCM for Danfoss
Hydraulic Motor BMER OMER 350 375 400 CCM for Danfoss
MOQ: 100 PCS
Note: If you have any questions,please contact us
- 1. Advanced manufacturing devices for the geroler gear set, which use low pressure of start-up, provide smooth and reliable operation and high efficiency.
- 2. The output shaft adapts in adapts in tapeered roller bearings that permit high axial and radial forces.
- 3. The case can offer applications of high pressure and high torque in the wide of applications.
- 4. Advanced design in disc distribution flow, which can automatically compensate in operating with high volum efficiency and long life. Provide smooth and reliable operation.
- 5. The new series motor is suitable for vehicles with greater loads and pressures drop.
- 315CC
XINGTAI FEIYUE HYDRAULIC PARTS FACTORY
Since:
1985
Product Description
BMER SERIES HYDRAULIC MOTOR
BMER series motor adapt the advanced Geroler gear set designed with high speed distribution flow and high pressure, and have good stability in low speed, and can keep high volume efficiency. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic features:
1. Advanced manufacturing devices for the Geroler gear set, which use low pressure ofstart-up, provide smooth and reliable operation and high efficiency.
2.The output shaft adapts in needle roller bearings that permit high axial and radial forces.The case can offers capacities of high pressure and high torque in the wide of applications.
3.Advanced design in high speed distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
4.Lowest leakage rate, most accurate timing methods.Commutator rotates 6x faster than shaft speed. It make the distribution in a high precision reduces life-cycle cost,maintain high volume efficiencies and can run very smoothly at low speed,gear box not required.
| Product NO | BMER |
| Displacement (CCM) | 125/160/200/230/250/300/350/375/400/475/540/650/750 |
| Mounting Flange (MM) | 82.55 |
| Shaft (MM) | 25/32/25.4/31.75 |
| Port Size | 7/8-14UNF G1/2 |
| Drain Port | / |
| Shaft end thread | M8 |
| Mounting holes | 4 |
| Oil Port shape | 7/8-14UN |
| Parallel key width（MM） | 8 |
BMER Main Specification
| Type | BMER 125 | BMER 160 | BMER 200 | BMER 230 | BMER 250 | BMER 300 | BMER 350 | BMER 375 | BMER 400 | BMER 475 | BMER 540 | BMER 650 | BMER 750 | |
| Geometric displacement(cmJ/rev.) | 118 | 156 | 196 | 228 | 257 | 296 | 345 | 371 | 405 | 462 | 540 | 647 | 745 | |
| Max.speed (rpm) | Cont. | 360 | 375 | 330 | 290 | 290 | 250 | 22Q | 200 | 18S | 160 | 140 | 115 | 100 |
| Int. | 490 | 470 | 425 | 365 | 350 | 31S | 270 | 240 | 220 | 19S | 170 | 138 | 120 | |
| Max.torque (N m) | Cont. | 325 | 450 | 530 | 625 | 700 | 810 | 905 | 990 | 1010 | 1085 | 980 | 1015 | 1050 |
| Int. | 380 | S2S | 600 | 710 | 790 | 930 | 1035 | 1140 | 1180 | 1180 | 1240 | 12S0 | 1180 | |
| peak | 450 | 590 | 750 | 870 | 980 | 1120 | 1285 | 1360 | 1360 | 1260 | 1380 | 1380 | 1370 | |
| Max.output (kW) | Cont. | 12.0 | 1S.0 | 15.5 | 16.0 | 17.5 | 18.0 | 17.5 | 16.5 | 15.5 | L4.5 | 11.5 | 10.0 | 8.0 |
Int.
| 14.0 | 17.5 | 18.0 | 19.0 | 20.0 | 21.0 | 20.0 | 19.0 | 18.0 | L&5 | 15.0 | 12.0 | 10.0 | |
Max. pressure drop (MPa) | Cont. | 20.S | 20.5 | 20.5 | 20.5 | 20.5 | 20.5 | 205 | 20.5 | 19 | 17.5 | 14 | 12 | 10.5 |
| Int. | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 225 | 19 | 175 | 15.5 | 12 | |
| peak | 27.6 | 27.6 | 27.6 | 27.6 | 27.6 | 27.6 | 27.6 | 27.6 | 25 | 也5 | 205 | 17.5 | 14 | |
| Max.flow (L/min) | Cont. | 4S | 60 | 70 | 70 | 75 | 80 | 80 | 7S | 75 | 75 | 7S | 75 | 7S |
| Int. | 60 | 75 | 85 | 85 | 90 | 95 | 95 | 90 | 90 | 90 | 90 | 90 | 90 | |
1.Continuous pre$sure:Max.value of operating mctor continuously.
2.Intermittent pressure:Max.vaIue of operating motor in 6 seconds per minute
3.Peak pressure:Max.value of operating motor in 0.6 second per minute.
Product list :fei yue catalogue 2021
Exhibition
Application Field
Production flow chart of some parts of hydraulic motor
Packaging and shipping pictures
FAQ：
Q1:Can you provide a sample before a big order?
A:Yes, we can .
Q2:Can I have my brand on the products?
A:Of course you can.
Q3:How about your quality?
A:Most of the excavator/loader/Engineering vehicle companys is our customer in China, we also have confidence to supply good products to our foreign customers.
Q4: How long has your company run in Hydraulic Fields?
A:Over 35 years
Q5: Which payment terms do you accept?
A: T/T and Paypal
Q6: What is your delivery time？
A:It depends on whether the products you buy is in stock.If in stock, ship it within 3-5
days, if not, it will be decided by the time of factory production.
Q7: What's the warranty of your products?
A:One Year after shipment.
Q8: Is your company accept customization?
A:We could accept OEM depends on quantity.
People Who Viewed This Also Viewed
-
OMPH 200-400CCM Eaton H Series Motor High Speed Small Hydraulic motor
- Score:
- MOQ: 100 PCS
- Sold: 0 PCS
BMER 750CCM Large Torque Low Leakage Cycloidal Motor Hydraulic Motor
- Score:
- MOQ: 100 PCS
- Sold: 0 PCS
BMER 125CCM Large Torque Low Leakage Cycloidal Motor Hydraulic Orbital Motor
- Score:
- MOQ: 100 PCS
- Sold: 0 PCS
- Score: