Home > Industrial & Scientific> Lubrication System And Accessories> Lubrication Distributor > Single-row Single-line Distributor For Lubrication System
Single-row Single-line Distributor For Lubrication System
Single-row Single-line Distributor For Lubrication System

Single-row Single-line Distributor For Lubrication System

Score
Sold: 0 Question And Answer 0

MOQ: 10 PCS

Note: If you have any questions,please contact us

  • The discharge pressure of the single-row single-line distributor comes from pressure in the supply line.
  • At normal temperature, the maximum discharge pressure may be up to 3.0 Mpa.
  • Under low-temperature environment, the discharge pressure will be automatically increased with reduced air temperature.
  • After the grease pump is stopped, the distributor storage chamber meters the grease stored.
Zhengzhou Autol Technology Co.,Ltd.

Zhengzhou Autol Technology Co.,Ltd.

Since:

2005

You May Also Like

Product Description

Single-row Single-line Distributor For Lubrication System

 

Maximum operating pressure: 6.3 Mpa

Grease available: NLGI-000#、00#、0#

Displacement: 0.13、0.2、0.4ml/cy

 

1.The umbrella valve inside the distributor moves upward under the pushing force of the pressure grease in the supply line.

 

2.The umbrella valve seals up the center hole in core rod. And, the high-pressure grease in the supply line pushes the piston to move upward against the spring resistance to discharge the grease remained in the upper chamber of the previous cycle.

 

3.The grease discharge is finished when the piston moves to the top of the upper chamber.

 

4.The unloading valve will automatically be opened when the grease pump is stopped Now, the high-pressure grease inside the supply line flows back via the unloading valve, allowing that the system pressure drops rapidly. Then, the piston of the distributor returns under the action of the spring. And, the umbrella valve is reset to seal up the grease inlet. Next, the piston delivers grease from the lower chamber to the upper chamber through the center hole in core rod.

 

Thus, the grease supply is also ready for the next cycle.