中文
English
Español
Français{{i.title_en}}
Home
> Hydraulics> Hydraulic Valve> Pressure Valve > Pilot Operated Pressure Relief Valve Type ZDB-Z2DB6
Pilot Operated Pressure Relief Valve Type ZDB-Z2DB6
MOQ: 100 PCS
Note: If you have any questions,please contact us
- 1. Sandwich plate valve;4pressure ranges;5circuit options
- 2. With one or two pressure relief cartridges
- 3. Adjustment elements; Rotary knob
- 4. Sleeve with hexagon and protective cap
- 5. Lockable rotary knob with scale; Lockable rotary knob
- ZDB/Z2DB6
BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD
Since:
1979
Product Description
Functional, section
Pressure relief valve types ZDB and Z2DB are pilot operated and are of sandwich plate design.
They are used to limit the pressure within a hydraulic system.
They basically consist of the housing (7), together with one or two pressure relief valve cartridges.
The system pressure is set by means of adjustment element (4).
At rest, the valve is dosed. Pressure in port A acts on the spool (1). At the same time pressure passes through orifice (2) on to the spring loaded side of spool (1) and via orifice (3) to the pilot poppet (6).
If the pressure in port A rises above the value set on spring (5), the pilot poppet (6) opens. Fluid can now flow from the spring loaded side of spool (1), orifice (3), and channel (8) into port T.
The resulting pressure drop then moves spool (1). causing this to open connection A to T, while the pressure set at spring (5) is maintained
Pilot oil from the two spring chambers return externally to tank via port T.
Ordering code
Technical data( for applicatios outside these parameters, please consult us)
Unit dimension: type ZDB 6...-40B...(Dimension in mm)
Notice
1.The fluid must be filtered. Minimum filter fineness is 20 gm.
2.The tank must be sealing up and an air filter must be installed on air entrance.
3.Products without subplate when leaving factory, rf need them, please ordering specially.
4.Valve fixing screws must be high intensity level (class 10.9). Please select and use,them according to the parameter listed in the sample book.
5. Roughness of surface linked with the valve is required surface roughness is 0.8.
6. Surface finish of mating piece is required to 0.01/100mm.