Home > New Energy> Solar Energy> Household Solar Charge Controller > PWM Solar Charge And Discharge Controller HC2410-C
PWM Solar Charge And Discharge Controller HC2410-C

PWM Solar Charge And Discharge Controller HC2410-C

Score
Sold: 0 Question And Answer 0

MOQ: 20 PCS

Note: If you have any questions,please contact us

  • 1. 32-bit high-speed main control chip.
  • 2. Large-screen LCD, adjustable charging, and discharging parameters.
  • 3. Have temperature compensation function, automatic adjustment of charging value.
  • 4. Double MOSFET to use in the circuit for prevent power back-flow, with ultra-low heating
  • 5. LCD screen to visually read the parameters and set them with button
  • HC2410-C
  • HC2420-C
SRNE Solar Co.,Ltd

SRNE Solar Co.,Ltd

Since:

2009

You May Also Like

Product Description

PWM Solar Charge Controller HC Series

Parameters

 

ModelHC2410-CHC2420-C
System voltage12V/24V
Battery operating voltage range0.06~0.36W
Rated currentCharge10A20A
Load10A20A
Maximum PV input voltage

120W/12V

240W/24V

240W/12V

480W/24V

Maximum PV input voltage50V, enable protection and stop charging. Below 45V, charge resumes.
Charging modeThe default is PWM charging,b04/b07 can be set to intermittent charging.
USB output5V/2A
Static power consumption≤10mA
Operating temperature-35~+60℃
Altitude≤3000M
IP ratingIP32
Product size120*75*34mm134*85*36mm
Installation size108.5*58.5mm121*70mm
Weight130g180g

 

Performance characteristics: 
1. 32-bit high-speed main control chip.
2. Large-screen LCD, adjustable charging, and discharging parameters.
3. Support SLD (default), GEL, FLD, LiFePo4, Program,total of five modes
4. RS485 interface with adjustable baud rate up to 115200bps.
5. Automatic recognition of 12V/24V range voltage of the lead-acid battery.
6. Multi-stage PWM charging management can be set to on-off charging, better supporting the voltage-sensitive load.
7. Have temperature compensation function, automatic adjustment of charging value.
8. Multiple select-able load modes.
9. Built-in reverse connection protection, open circuit protection, high-temperature protection, over current/short circuit protection
10. (which can be set), are self-recovery types, that do not damage the controller
11. Double MOSFET to use in the circuit for prevent power back-flow, with ultra-low heating
12. Support Li-ion battery activation.
13. LCD screen to visually read the parameters and set them with button